WonderSwan New USB Power Board + 3D Printed Flat Cover
White, black, and red can be changed after purchase if you leave a comment.
This is a USB power supply unit for the WonderSwan Color/Crystal with a custom 3D printed cover. (This is a set of the power board and the cover.)
Older Chinese power boards had tall components, creating a bulge like a typical battery case. However, a new type of power board released around late 2023 has lower-profile components, allowing for a flat cover to be attached.
I've printed it as cleanly as possible, but due to the layer-by-layer printing process, it has a slightly jagged texture. Please consider this normal. With translucent colors, the LED is visible through the material, and some print lines are noticeable, but this is the current product specification. (See photos) With opaque colors like white, black, and red, the LED is barely visible (almost completely invisible with black).
Power is supplied via a USB-C connector. Any standard 5V output will work. (USB-PD is not supported.)
Only the power unit and board cover are included. The power board itself is not included.
The board cover is made of PLA resin and is sensitive to high temperatures.
Do not leave it in places exceeding 40°C (104°F) as it may deform.
Other colors will depend on the availability of affordable filament. Please request colors in the comments, and I will check if they are possible.
For those who already have the power board:
If you only want the cover, please ask in the comments. However, due to variations in board soldering, the metal contacts might be slightly raised, and the cover may not fit without modification. This is intended for users who are comfortable with minor adjustments like sanding.
Currently, this is Ver. 0.47, and the shape is periodically reviewed.
This is a USB power supply unit for the WonderSwan Color/Crystal with a custom 3D printed cover. (This is a set of the power board and the cover.)
Older Chinese power boards had tall components, creating a bulge like a typical battery case. However, a new type of power board released around late 2023 has lower-profile components, allowing for a flat cover to be attached.
I've printed it as cleanly as possible, but due to the layer-by-layer printing process, it has a slightly jagged texture. Please consider this normal. With translucent colors, the LED is visible through the material, and some print lines are noticeable, but this is the current product specification. (See photos) With opaque colors like white, black, and red, the LED is barely visible (almost completely invisible with black).
Power is supplied via a USB-C connector. Any standard 5V output will work. (USB-PD is not supported.)
Only the power unit and board cover are included. The power board itself is not included.
The board cover is made of PLA resin and is sensitive to high temperatures.
Do not leave it in places exceeding 40°C (104°F) as it may deform.
Other colors will depend on the availability of affordable filament. Please request colors in the comments, and I will check if they are possible.
For those who already have the power board:
If you only want the cover, please ask in the comments. However, due to variations in board soldering, the metal contacts might be slightly raised, and the cover may not fit without modification. This is intended for users who are comfortable with minor adjustments like sanding.
Currently, this is Ver. 0.47, and the shape is periodically reviewed.
Category
Other Models
Condition
New/unused
Shipping
Included in price (by seller)
From
Saitama
Customers Also Viewed
Was this page helpful?
marty.unleash.wiring disabled
